|

Break in Directions

1. Use a fuel mixture of 16 : 1 ( Gas to Oil ) (8oz to 1gal)with the use of Synthetic 2 stroke motorcycle oil and Octane 89 or above gas. This fuel ratio is recommended for the first 2 full gas tanks. Once broken in, you can drop the ratio to 20 : 1 ( Gas to Oil ) (6.4oz to 1gal).

2. Do not ride the motor for more than 10 – 15 minutes at a time till its broken-in.

3. Variable speeds are recommended and do help with a good break in such as running the motor slowly, then revving high, then going slow again. However do not run the motor at full throttle for more than 15 – 25 seconds at most. This is an essential consideration and critical to the proper operation of the engine during break-in. Following proper break-in instructions means that pistons and rings will not seize. Proper break in followed by routine maintenance will allow your motorized bicycle to take you thousands of miles.

4. Always turn your Fuel Valve OFF when Motor is not running…

5. Do not allow MOTOR to run Unless you are Riding the bike.. If you let the Motor run you run the chance of the CLUTCH BEARINGS locking up because it is a dry clutch system…

 

CALL DON @ (727) 688 – 8075

Had a customer buy one of our kits and he had it together in Record Assembly Time for a motorized bicycle. Good job, now some lights and be sure to always ride carefuengine kits

     

 

 

 

 

 

 

 

 

NO LICENSE NO PROBLEM ELECTRIC BICYCLES AWESOME AND LEGAL!!! This bike is beautiful, rides great and is totally legal to ride even if you have no license!!!

CALL DON @ (727) 688 – 8075


 

ch1#415 Heavy Duty Chain $19.99

#415 Master Link $8.95

#410 Standard Duty Chain415 Master link

#410 Master Link $8.95

#415 Half Link $8.95

ch5

8186459-18955008

#415 Heavy Duty Chain $19.99

#415 Master Link $8.95

#410 Standard Duty Chain

#410 Master Link $8.95

#415 Half Link $8.95


 

 

 

Chain Tensioner  $14.95 + shipping $6.95